AIRBUS A320 · CIDS · FAP

A320 FAP Simulator

Train on a full replica of the Airbus A320 Flight Attendant Panel: cabin lighting, doors and slides, PRAM announcements, water/waste, lavatory smoke and evacuation signalling.

User Manual (PDF) — every function explained

v4.1 · Android 7.0+ tablet · Windows 10 / 11 PC (64-bit)

FAP cabin lighting page with A320 fuselage diagram

Offline Ready

Activate once online, then everything runs on the tablet, even with no internet in the classroom.

Authentic A320 CIDS Logic

BRT / DIM 1 / DIM 2 lighting, slide arming, EVAC CMD and RESET, SMOKE RESET and real Airbus chimes.

Flight Attendant Training Drills

Arm / disarm and cross-check, passenger signs, lavatory calls, smoke, evacuation, low cabin pressure, PRAM and CIDS fault scenarios.

TUTORIAL

See every function in action

A full walk-through of the panel, page by page: lighting, audio and PRAM, doors and slides, water/waste, smoke and evacuation.

Watch on YouTube →

Note: PRAM (pre-recorded announcements and boarding music) is an airline option. Not every A320 has it. Without PRAM, the cabin crew make all announcements with the handset, and there is no boarding music from the FAP.

User Manual (PDF)

52 pages: every page, key and hard key explained with screenshots, plus step-by-step training drills and troubleshooting.

DOWNLOAD PDF

Instructor Guide (PDF)

34 pages for the instructor: classroom set-up, license codes, ten lesson plans with expected results, and an assessment checklist.

DOWNLOAD PDF

Feature Sources & A320 Conformance (PDF)

Where every feature comes from and how it compares with the real A320 CIDS Flight Attendant Panel, with the sources used.

DOWNLOAD PDF

THE PANEL

Every page of the classic CIDS FAP

Follows the real A320: grey keys are available, green is selected, amber is caution and red is alarm. The FAP screen shows only the real A320 FAP. Everything the instructor simulates (cockpit, passengers, doors, aircraft, maintenance) is in a separate INSTRUCTOR panel outside the FAP.

STATUS

Every system at a glance, including the passenger signs.

CAUT

Flashes for a new event and asks for its page; steady once seen.

AUDIO

4 boarding music channels, PRAM with MEMO / PLAY ALL, calls, chimes.

LIGHTS

BRT 100% · DIM 1 50% · DIM 2 10% per cabin zone.

DOORS / SLIDES

8 exits. Open an armed door and the slide deploys.

TEMP

FWD / AFT zones: ±2.5 °C fine adjustment of the cockpit setting.

WATER / WASTE

200 L potable water, 170 L waste, lavatory status.

SMOKE

LAV A / D / E detectors, SMOKE RESET, auto-clear when smoke is gone.

SEAT SETTING

Inhibit call buttons or reading lights per seat, passenger calls.

SYSTEM INFO

CIDS directors and messages, CAPT / CAPT & PURS selector.

CABIN PROG

Move cabin zones between classes and save to the CAM.

LAYOUT SELECT

Load the layouts of the CAM in the slot (ground only).

LEVEL ADJUST

Announcement and chime levels per zone, -6 to +6 dB.

SW LOAD

Load the CIDS software from the OBRM in the slot.

FAP SET-UP

Brightness, volume, key click; remove and insert PRAM / CAM / OBRM cards.

HARD KEYS
EVAC CMD
EVAC RESET
EMER
PED POWER
LIGHTS MAIN
LAV MAINT
SCREEN LOCK
SMOKE RESET
FAP RESET
PAX SYS
Slide deployed after opening an armed door
Slide deployed after opening an armed door
Lavatory smoke alert with crew actions
Lavatory smoke alert with crew actions
PRAM announcements and cabin chimes
PRAM announcements and cabin chimes
Evacuation command active
Evacuation command active

License code required

The first time the app opens, enter your license code (for example A320-k7Rm9Qx2), exactly as given: capital and small letters matter. Activation needs an internet connection once. Each code works on one device only; after activation the simulator runs offline. Ask your instructor for a code.

New tablet or PC? Ask your instructor or administrator to move the license, then enter the same code on the new device.

Updates: the app checks for a new version when it starts, and ⚙ SETTINGS has Check for updates. Tap Update now: it downloads and opens the installer. Your license stays active.

No code yet? Try the free demo with code A320-DEMO (no internet needed). The demo includes one lighting function (MAIN ON/OFF) and one audio function (boarding music); the other functions ask for a license code.

Android APK · v4.1

DOWNLOAD

Scan to install on your tablet

  1. 1Scan the QR code with the tablet camera, or tap Download APK.
  2. 2Allow "Install unknown apps" for your browser when Android asks.
  3. 3Open the app, enter your license code (internet needed once), and hold the tablet in landscape.

WINDOWS

Install on a Windows PC

  1. 1Download the Setup and open it.
  2. 2If Windows shows "Windows protected your PC", click More info, then Run anyway.
  3. 3Follow the Setup (Next, accept the notice, Install). A desktop shortcut is created.
  4. 4Open A320 FAP Simulator and enter your license code (internet needed once).
DOWNLOAD FOR WINDOWSSetup · v4.1 · Windows 10 / 11, 64-bit

IMPORTANT NOTICE & DISCLAIMER

This software (A320 FAP Simulator) is developed by Overdrive Interactive for academic, familiarization, and educational training purposes only.

  1. 1.NOT AN OFFICIALLY CERTIFIED FTD: This application is a classroom supplement and is NOT certified by Airbus, FAA, EASA, CAAP, or any civil aviation authority for official type-rating or flight training credits.
  2. 2.NO AFFILIATION: "A320" and related aircraft trademarks belong to Airbus. Overdrive Interactive is an independent entity with no official endorsement or affiliation with Airbus.
  3. 3.ACCURACY & LIABILITY: While modeled for realistic interaction, operational variances may exist. This software must NOT be used for real-world aircraft operation, checklist validation, or actual emergency procedures. Overdrive Interactive assumes no liability for misuse.